Introduction to some rules and precautions for the use of stainless steel shots

　　Although stainless steel shots are not seen in the current industry, their role is still very huge. Let's follow the editor to look at some rules and precautions for the use of cast steel shots:

　　Wire cut shot has a hardness between HRC58-65, which is higher than steel balls and cast iron shots. It is more brittle and has a shorter lifespan. How to limit the scope of application? It is mainly used in places where shot peening strength requirements are high. Iron shots are harder than steel shots and are more difficult to spray metal parts. Therefore, some of them are used in shooting high-strength materials. Generally, the hardness value of cast iron shots. Pay attention to the iron shots used. When wire cut shots act on aluminum alloy materials, iron pollution will be generated on the surface of aluminum parts. They should be cleaned in time to avoid serious surface electrochemical corrosion.

　　Matters for the use of wire cut shots in the industry:

　　1. Mold industry: Generally speaking, molds are mostly cast, and the molds themselves require smoothness. Shot blasting cleaning machinery can be polished according to different requirements without damaging the original appearance and performance of the mold.

　　2. Shipyard: The steel plates used in the shipyard have rust. The quality of the raw materials of the steel wire cut shot will affect the quality of shipbuilding. It is impossible to remove the rust manually, which will be a lot of work. This requires a machine to remove the rust to ensure the quality of shipbuilding. The series of through-type can solve this problem;

　　3. Bearing factory: The bearing is pressed by a mold and has a smooth surface. However, sometimes there are still some impurities or burrs, which also need to be cleaned. At this time, the shot blasting cleaning machine comes in handy.