The following is the cause of common faults and exclusion methods of the blasting machine:
1) Bullet does not meet the requirements, causing sand cards and replacing qualified projectiles.
2) There is a large particle material in the pill material, which can be cleared.
3) Relax of the installation of the shot shot shot shotrine, friction with the impeller or the wheel, adjust the model guard.
4) Pills are loosely loosen by bolt bolt, and bolts are tight.
2. The amount of uniform blasting spray machine.
1) Adjust the opening of the pill gates.
2) Adjust the sand regulator of the cell separator to make the stream uniform.
3. The impact of the vibration of the shot blasting device increases the failure.
1) The blade is severely worn, the operation is unbalanced, and the blade is replaced.
2) The leaf wheels are severely worn and the impeller is replaced.
3) Bearing is burned, replaced and lubricated.
4) Whether the pills are fixed to the connection bolt loose and fasten bolt.
4. The dust collector's dust is low.
1) The dust collection fan wiring error, the fan reverses, and the wiring.
2) The inner cloth bag in the dust collector is tied for unfortunate, there is damage or a lack of a cloth bag.
3) The dust removal pipeline joint is not sealed well to ensure the sealing of each component.
4) The cleaned workpiece did not polish as required.
5) Filtering the reversal mechanism is not enabled to make the energy or less, the dust collection bag is blocked, and the dust attached to the bag is quickly removed.
5. There are too many dust collectors to contain too much dusty balls.
Excess points of the separator, use the adjustment port shutter until the dust removal effect can be guaranteed, but it does
Steel shot is widely used for descaling and rust removal treatment
How are steel shot and grit used to treat steel surfaces?
Steel shot is widely used for descaling and rust removal treatment
What are the unique characteristics of steel shot?
