The correct position of the sand blasting machine directly affects the normal of the mobile shot blasting machine

　　The mobile shot blasting machine works on the same principle as other types of shot blasting machines. It is also a machine that scatters particles onto a working surface at high speed and at an Angle. The machine is compact, convenient and flexible, and many users have begun to use it to clean steel plates.

　　And the price of the mobile shot blasting machine is much cheaper than the steel plate shot blasting machine. The metal surface of the steel plate is rough, smooth and clean, which can effectively improve the adhesion of the coating. The whole process is dust-free, which can effectively remove impurities such as rust, rust skin and primer on the steel plate.

　　Sand blasting machine is the main component of mobile shot blasting machine. The correct position of the sand blasting machine directly affects the normal operation of the mobile shot blasting machine, which needs to adjust the mobile shot blasting machine. The control of sand blasting machine should pay attention to the direction of directional sand blasting. The projectile should completely cover the cleaning of the workpiece, otherwise it will affect the cleaning ability.

　　The projection Angle of the mobile shot blasting machine should be observed and adjusted in time. The mobile shot blasting machine provides a special rule that allows you to freely control the direction within the scale. After injection, it will sit on top of the metal plate, and it is good to see that the center of the bullet point is not angled or at 90 degrees to the left or right side.

　　It should be adjusted in time to exceed this ratio. As long as the accuracy of viewpoint adjustment can properly improve the speed of the projectile, the mobile shot blasting machine can run smoothly and obtain mechanical properties. The structure of mobile shot blasting machine is very complex, if used improperly will damage the machine.

　　Therefore, it is necessary to clarify how to use safe and standardized machines. First, repairs should be made as needed. Secondly, some parts should be replaced regularly. If the above requirements are met, the machine can be used continuously, otherwise it will greatly shorten its service life