How to carry out the heat treatment process of steel wire cut shot

　　The heat treatment process removes the internal stress of the electric welding welding of the steel wire cut shot manufacturer. In addition, the heat treatment method makes the steel wire cut shot welding area and the heat hazard area harden the raw material, and the aging mechanism has softened, resulting in compressive strength and ductility. Good toughness, hardening, to improve the ductility and impact toughness of the butt weld;

　　For steel cut shot manufacturers, the internal stress can be sufficiently reduced; the post-weld heat treatment method can be divided into two processes to remove the internal stress of electric welding welding, which is the whole process of dividing steel wire cut shot heating and steel wire cut shot heat insulation; in steel wire cut shot manufacturers During the heating process, welding is used as the yield limit stress of the weakened material to reach the temperature of the post-weld heat treatment, and the reduced stress is the yield limit material below this temperature;

　　In the whole process of heat insulation, we consider the internal stress analysis and structural characteristics of the El cause caused by the internal stress of electric welding due to stress relaxation (high temperature release) and the impact on the main parameters of the welding method. Application, post-weld heat treatment of steel wire cut shot manufacturers, to remove the welding residual working pressure of the core components of the safety door, and achieved remarkable results;

　　Steel cut shot is made of high-quality steel trim. We mainly melt the raw material, and then spray it with high-pressure water to make the molten steel form a small ball. The formed shot is heated again to clean and homogenize. Then carry out heat treatment on the steel ball;

　　The pellets after such heat treatment are air-dried in the melting furnace and heated and quenched from the beginning to achieve the proper strength we need. After quenching, the steel balls are screened into 11 pieces that meet the requirements through mechanical stainless steel screens. Level for shot blasting equipment;

　　Generally speaking, products with different particle size distribution and strength are used in different processing techniques, such as surface strengthening and other processes;

　　Stainless steel wire cutting is generally used for descaling and anti-rust treatment of steel product workpieces before spraying. In this case, we often use suction filter shot blasting equipment;

　　The general spherical shape and small strength make the steel ball not easy to cause great damage to the equipment;

　　Nowadays, the price of steel wire cut shot is also widely used in forging industry production. When the steel product workpiece is removed from the mould, we can use it to remove the machine sand on the surface of the product workpiece;

　　When the price of steel cut shot is used together with suitable machinery and equipment, and because the price of steel cut shot is very strong and durable, it is also a good assistant in everyone's work;

　　Because the direct ignition method consumes more fuel, in the whole process of steel wire cutting shot price heating, electric welding is used as the yield limit internal stress of the weakened material, and the temperature of post-weld heat treatment is achieved, and the reduction of internal stress is at this point Raw materials at temperatures below the yield limit;