Abrasive shot is also called high manganese steel shot. It is a product that is cut into a cylinder with high manganese steel wire at high speed and then rounded. When the shape is ground to three tenths of the original, it is shot blasted The machine dust extraction system or separation equipment is cleaned up, and it is the life cycle time to complete it.
With the continuous development of the market, the requirements for science and technology and mechanical products are getting higher and higher. Coupled with the increasingly fierce competition in the market, enterprises are constantly reducing costs while improving product quality, so as to obtain greater profits. The competitive advantage in the market, and the abrasive pellets are in line with this positioning.
Compared with other products, the abrasive shot has a greater competitive advantage in terms of manufacture and use. The abrasive shot has the characteristics of high manganese steel, and at the same time has no holes, no cracks, and a relatively balanced hardness. It is comparable to steel wire cut shots and cast steel shots. In comparison, the advantages are relatively large.
Cast steel shot has disadvantages such as pores, cracks, and short service life; while steel wire cut shot has no guide angle and has edges and corners, which will cause great damage to equipment and workpieces and strong destructiveness, thus increasing the cost. Grinding shot overcomes this. The determination of the two products, no pores, no cracks, high cost performance.
What are the advantages of grinding shot compared with cast steel shot?
1. The composition of the grinding pellets is relatively stable.
2. The toughness and tensile strength of the abrasive pellets are high.
3. Grinding shot overcomes the weakness of cast steel shot, has no pores and is not broken.
4. The service life of the abrasive pellets is longer.